Description

The ARK Just A Jetson is an NDAA compliant and made in the USA NVIDIA Jetson Orin NX/Nano Carrier Board. Supporting direct battery input up to 75V and a built-in IMU.

• Jetson Orin NX/Nano Form Factor
  • Supports Super Power Mode
• Connectors
  • XT60 Battery Input
    • 75V Max
    • 5.5V Min
    • Built INA238 Power Monitor
    • Built in 5.2V 8A Regulator
  • XT30 Battery Output
    • Measured Output with Power Monitor
  • 5V Digital Power Module Input
    • 5V 6A Max
    • I2C Power Monitor Support
    • 6 Pin Molex CLIK-Mate
    • For Redundant or Extra Power
    • Supports ARK PAB Power Modules
  • Gigabit Ethernet
    • RJ45
  • Dual MIPI CSI Camera Inputs
    • 2x – 22 Pin 0.5mm Pitch Raspberry Pi Cam FFC
  • Dual USB 3.2 + USB 2.0 Host Ports
    • 2x – USB A
    • 1.5A Current Limit
  • USB C Dual Mode (OTG) Port
    • 1.5A Current Limit
  • Dual USB 2.0 Host Ports
    • 4 Pin JST-GH
    • 1.0A Current Limit
  • M.2 Key M 2242
    • PCIEx4
  • M.2 Key E 2230
    • PCIEx2
    • USB
    • I2S
  • PCIE 16 Pin FFC Connector
    • Matches Raspberry Pi 5 PCIE Pinout
    • PCIEx2
  • HDMI Full Size Connector
    • HDMI v2.1
  • CAN Port
    • 4 Pin JST-GH
  • SPI/GPIO Port
    • 7 Pin JST-GH
  • I2S/GPIO Port
    • 7 Pin JST-GH
  • UART0/GPIO
    • 6 Pin JST-GH
  • UART1/GPIO
    • 6 Pin JST-GH
  • UART2/I2C0
    • 6 Pin JST-GH
    • Debug Console Defaults to UART2
• Built in IMU
  • ICM-42688P
• USA Built
  • NDAA compliant
• Power Requirements
  • 5V
  • 4A Minimum
  • Depends on Usage and Peripherals
• Dimensions Without Jetson
  • 100mm x 72mm x 23mm
• Weight
  • Without Jetson and M.2 Modules – 75g

*Requires a NVIDIA Jetson Orin Nano or Jetson Orin NX. Jetson Nano and Jetson Xaviar NX are partially compatible.

Documentation