Description
The VOXL2 RTK Pixhawk Autopilot Bus (PAB) Carrier is based on the Pixhawk Autopilot Bus open source specification, the ModalAI VOXL2 Carrier Board, and includes a u-blox ZED-F9P RTK GPS. The Pixhawk Autopilot Bus (PAB) form factor enables the PAB Carrier to be used with any PAB flight controller such as the ARKV6X.
- Pixhawk Autopilot Bus (PAB) Form Factor
- ModalAI VOXL2 Form Factor
- u-blox ZED-F9P GPS
- L1/L2
- Multi-band GNSS receiver delivers centimeter level accuracy in seconds
- Concurrent reception of GPS, GLONASS, Galileo and BeiDou
- Multi-band RTK with fast convergence times and reliable performance
- High update rate for highly dynamic applications
- Centimeter accuracy in a small and energy efficient module
- Moving Base for Heading
- MMCX connector
- ModalAI VOXL2 Connectors
- Micro-SD
- USB C
- USB 3.0 Host
- 5V 1.5A
- USB
- USB 2.0 Host
- 4 Pin JST-GH
- 5V 0.75A
- Autopilot Connectors
- PAB Board to Board Interface
- 100 Pin Hirose DF40
- 50 Pin Hirose DF40
- 40 Pin Molex Pico-Clasp
- Dual 5V 1.5A (Shared with Payload Connector)
- 5V 0.25A Out for RC Receiver
- Dual CAN
- Dual UART
- TX/RX
- UART
- TX/RX
- RTS/CTS
- Dual I2C
- PWM x 8
- SPI
- 11 Pin JST-GH
- Pixhawk Debug
- 10 Pin JST-SH
- SWD
- UART
- PAB Board to Board Interface
- Payload Connector
- 40 Pin Molex Pico-Clasp
- Battery Output
- Dual 5V 1.5A (Shared with Autopilot Connector)
- Autopilot UART
- TX/RX
- RTS/CTS
- Autopilot UART
- TX/RX
- Dual VOXL2 UARTs
- TX/RX
- USB 2.0
- 40 Pin Molex Pico-Clasp
- Power Connector
- 14 Pin Molex CLIK-Mate
- 12S 3A Battery Input
- Dual 5V 6A Inputs
- Dual I2C Power Module Inputs
- USA Built
- NDAA compliant
- Blue Framework Listed
- Weight
- 25 grams
- Dimensions (Without VOXL2 and Flight Controller Module)
- 94.25mm x 36.00mm x 18mm
